Tag: Carports

Additions/Extensions Terms & Conditions

If you’re thinking about adding to your existing carport or extending it a few feet, you should make sure to review the following criteria to approve such modifications. Although, extensions and additions can be done to some buildings, not all units qualify. Please review the following points before submitting an order. This guide well better inform you on what to expect and what charges can be applied to any extension or addition.

 

Including, but not limited to the following:

 

1. American Carports Inc. does not offer warranties on the purchase of any addition/extension to your existing unit.

2. Roof leakage. (where connection of panels will be made)

3. Color discrepancy on siding. (Color panels will vary in tone, samples available)

4. Paneling forms not matching (ridge on panes not aligning causing sunlight or debris to enter)

5. Visibility of Silicone after applied onto panels/overlap due to panels added.

6. Frame rust and/or Galvanization appearance on any tubing.

7. Any trim not matching on design and color due to manufacturing changes. (samples available)

8. Any colors, tube frames and designs on walk in doors, overhead doors and roll up doors not matching existing ones. (change in suppliers)

9. Anchors (any type) not matching existing ones.

10. The unit might have screws, not aligning or matching existing lay out. (including quantity)

 

CONDITIONS FOR NEW ADDITIONS/EXTENSIONS

 

1. Additions or Extensions must be $1,500.00 or more and a 50% down payment will be required.

2. The new foundation surface (ground, gravel, asphalt, or concrete) where addition will be added needs to be level to match existing structure (within 1-2 inches’ max)

3. If foundation surface is not leveled or if it is not adequate; I, as the customer will be responsible for an extra fee with a minimum of $150.00 and/or any extra fees that may include the following:

4. Return fees due to changes at last minute.

5. Extra labor within the scope of work planned for the addition on hand.

6. Going back to the shop to re-adjust the materials for a specific reason not mentioned by customer at the beginning (when first consulted with sales rep.).

7. Cutting the legs on site to level the structure.

8. Any additional parts or sections of the existing unit that may need to be removed and/or re-installed there will be a 50% charge of the current value.

9. In the event of cancellation of the full order, there will be a 50% charge of the total cost of the entire order, this may include labor charges already described on the purchase order (restocking fee)

10. Unit must be an American Carports Inc. product.

 

Lean-Tos

Have you considered covering a small part of your driveway for your vehicle? Perhaps providing shade to certain belongings that need to be protected from the harsh weather? Whichever case best describes your situation, know that American Carports is here to meet your needs and specifications.

 

Lean-to units are great for providing protection alongside existing buildings. These structures can be customized to fit your needs. A lean-to is a structure that slopes off in a single direction. Most lean-tos are attached to another structure. Unfortunately, American Carports cannot attach lean-tos to your existing structure—but we can install very close against the existing structure. These units are excellent options for installing a covered sidewalk along your building to protect your customers or guests from rain or snow.

 

If you would like to put a lean-to up against your house to provide parking for your vehicle, we can also do that. The spacing will have to be altered if you have doors or windows that you want to remain accessible and open. Just let us know the layout and specifications of your property so that we can customize the unit for you.

 

Since we’re talking about lean-tos, take a closer look at this 11’W x 17’L x 11’/9’H freestanding lean-to:

 

 

Need one like this? Perhaps something a little different? Give us call and ask to speak with one of our sales representatives! We’d be more than happy to assist you with any questions or concerns you may have.

 

 

*Note: Once a lean-to exceeds 12’ in width, additional material for reinforcement will be added.

A-Frame Horizontal Roof vs. A-Frame Vertical Roof

There are many options on how to customize a carport or metal building. Roof styles being one of those options. Although the following two that we’re about to mention are not the only options available, they are our most popular options. They are also hard to choose from unless you fully understand the orientation and reasoning behind the price difference.

 

The A-Frame Horizontal Roof (Boxed-Eave) is popular due to its residential style look. The ridges on the roof run front to back in sync with the roof line. This style is commonly used in areas that do not have much snow or rain fall but are not limited to those area. The panels run horizontally, so the unit requires a little maintenance to keep debris from piling up along the ridges.

 

 

The A-Frame Vertical Roof is our upgraded roof option. The ridges on this roof style run top to bottom from the peak down to the eaves. This option is popular in regions with heavy snow and rainfall. The direction of the panels makes it easy for debris to run off smoothly. This style of roof is the most expensive due to the extra material and reinforcement required for installation. Although this roof style is popular in areas with lots of snow and rain, many customers across the country still opt for his option due to the easy maintenance, sturdiness and look.

 

How to Care for a Steel Building

A steel building is a cost-effective way to increase the number of buildings on your property quickly and without significant investment. Not only are steel buildings affordable, but they’re also long-lasting.

 

However, even steel buildings need maintenance and care, or they will age quickly. Don’t let your investment cost more money in repair and maintenance than is necessary. Consider these three easy steps to keeping your steel building in terrific condition all year.

 

Conduct Regular Inspections of Your Steel Carports and Buildings

A simple and quick inspection is an effective way to make sure your steel carports and buildings are in good condition and don’t require repair. You may wish to schedule your inspections for the break between seasons. For example, you might do inspections at the end of winter and before the harsh summer season starts, as well as at the beginning of fall and before the weather starts becoming cold again.

 

You may wish to keep a file of your inspection dates, as well as the condition in which you find the building. If you have the time or resources, you can even take pictures of the building and examine them over time for changes. If you obtain repairs for damage on your metal garages, you may wish to take before and after pictures to document the work.

 

Always Repair in a Timely Fashion

Buildings like metal garages, metal barns, and steel carports are extremely sturdy, and they’re a fine choice for any homeowner or business owner who wants to place a building on his property that won’t need replacement just a few years down the road. However, neglecting the buildings and failing to complete repairs quickly can exacerbate problems and lead to higher-than-anticipated costs of ownership.

 

Regular inspections should catch any emerging problems, but those problems won’t just go away on their own. Waiting to fix various problems can mean a more expensive fix when the maintenance crew arrives. Don’t let damage from an accident turn a small dent or hole into a giant rusted area on the side of your steel carport. Get the area repaired quickly!

 

Eliminate Standing Water Around the Foundation

Features like gutters, downspouts, and features that draw water away from the foundation of a building are essential on homes and businesses because standing water and saturated ground destroy foundations. If you find that there are areas of standing water around your steel buildings, or you notice that heavy rains have caused the ground to become fully saturated, you may wish to make some changes.

 

Putting concrete down around the building can reduce the amount of moisture that may impact the building and keeping an eye on the gutter system can also reduce the likelihood of damage. Make sure to clean the gutters at least once a year (before winter and after the trees have let go of their leaves is an excellent time) and make repairs to the gutters quickly to avoid water damage. If you experience heavy snow one year, make sure to remove built-up snow on the roof of the metal building to avoid damage throughout the season.

 

Steel Barns from American Carports, Inc.

Is it time to upgrade the barn on your property to a brand-new metal barn? Do you want to add space for parking a car to your home with a new metal garage? Is it time to install a steel carport in your driveway? Learn how American Carports, Inc. can help with one of our excellent and sturdy steel buildings. Get in touch today to see how we can help.

30 x 41 x 12 – 3-Bay Metal Garage

If you have multiple vehicles at your house, it may be a little challenging to get every single one protected from the weather, especially if the only garage you have is the one attached to your house. Moving the other cars just to get one out can be quite annoying, too, especially if you’re in a hurry or the weather isn’t cooperating.

This scenario happens pretty often. That’s why American Carports encourages you to acquire a 3-bay metal garage for your vehicles. The big advantage of having your garage doors on the side of the building, instead of the end, is that expanding in length is not as expensive as expanding in width. End walls are pricier due to the material needed. With your garage doors on the side, your cars will be just as secure, and at a lower cost.

Check out this 30’W x 41’L x 12’H 3-bay metal garage:

  • A-Frame Vertical Roof
  • Horizontal Sides & Ends
  • 3 – 10’x10′ Roll-Up Doors
  • 36″x80″ Walk-In Door

You can always come up with your own designs as well. Also, remember that we can always adjust the length, width, and height of any metal building according to your needs. Doors sizes can always be changed as well. All the pictures we’ve shown, are just live examples of designs and styles that our customers opt for according to their specifications and tastes.

If you have a project in mind, or you’re looking to get a quote, give us a call! Let one of your experts assist you with any questions you may have. Don’t forget to ask about our financing options.

 

Things to Consider When Buying a Carport

Since their initial appearance back in the early 1900’s, carports have had a substantial high demand in the market. Because the industry has grown more complex, consumers have to put more thought into what unit to choose and who they are buying from. From car coverage and protection to workshop areas, the uses of these metal buildings are limitless. However, there are a few things  you should consider before buying a carport, from quality to the work ethic of the business. The process of purchasing a product should run smoothly and be an excellent experience from the sale representatives and the manufacturer to the customer service and installation process. We want you to be satisfied with your decision. That’s why we’ve created a list of important things to consider when buying a carport. Read below for some food for thought.

 

 

Top Factors to Reflect Upon

 

 You must decide if you want to purchase your building from a local or online dealer. Many of our  clients buy our carports from local dealerships where they’re surrounded by one or more of our demo displays, thus giving them a personal glimpse.

 

 Take note on what you are looking for. Perhaps you simply need space to park your car or need a larger building to store large capacity vehicles. We offer different roof styles such as an A-Frame Vertical Roof, A-Frame Horizontal Roof, and a standard roof that will better suit your needs and satisfactions. Our knowledged staff can give you suggestions if you have any doubts regarding your choices.

 

 Prior to choosing a carport location, check your local code specifications. It is important to consider your area’s building permit laws: you may need one to have a building on your property. You should also make sure, before installation, that the flooring is prepared ‒ whether it’d be concrete, asphalt, or plain ground. The geographic of your structure location should be leveled.

 

 Consider investing in any additional add-ons. We offer skylights that allow the sun to shine through your structure, dismissing the hassle of electric costs and light installation. Depending on the flooring we also provide concrete, asphalt, or mobile home anchors for extra reinforcement that will maintain your carport secure.

 

 

We aim to keep our clients satisfied before, during, and after installation day. If you order a product from our company, you will receive engineered certified steel structures with free shipping and installation. With these services we include you won’t have to worry about transportation or construction issues. Our buildings will last for years, so we know you need a company who will be there for you and support the product you purchased, and who will stand behind it. This is what sets us different from the rest. Choose your carport manufacturer wisely, choose American Carports, Inc.

 

 

Call today for a free quote. We’d be more than happy to assist you.

Another Well-Done Job from Our Installers in New Mexico

What American Steel Carports wants to see in their customers is a smile on their faces when they place an order with us. This doesn’t mean that our installers did a terrific job while installing the metal building, but that we as a company met all the customer’s needs and gave them nothing but satisfaction, from the moment they placed their order until they saw our installers erecting their metal building. Our customers are the one who push us to become better as a company and to provide outstanding service at all times.

 

Many customers ask us if they can change the size of a building they saw on our social media. The answer is always yes. All the garages, workshops, barns, mini-storages, and custom units we advertise were created by our customers: they came up with their own ideas, and we just turned those ideas into reality! So, don’t ever hesitate if you have an idea. We’ll work our way through it in order to meet all your expectations.

 

You might be wondering what kind of unit we’re referring to this time. Take a closer look at this 30′W × 31′L × 10′H metal workshop:

 

 

This workshop comes fully vertical, fully insulated, with one 10’×8′ roll-up door, one 8’×7′ roll-up door, a 36″×84″ heavy-duty walk-in door, a window, and concrete anchors.

 

We hope that all the buildings we post give you some inspiration to create the perfect metal building you’re looking for. Have something in mind? Give us a call! Let one of our experts help you customize your metal garage. And don’t forget to ask about our financing options. Want to see our buildings in person? Call us now and ask for your local dealer.

 

 

Versatile. Strong. Built to last.

 

Why you Should Contact your City Prior to Ordering

During the process of obtaining your desired metal building you should check with your local city or county first. They will provide for you all the local codes and requirements needed. The main benefit of doing so before purchase is to ensure that you do not face penalties or even the possibility of being forced to remove your building. Contacting the city will help you make sure that you purchase the correct building for snow and wind loads in your area. If a permit is required, American Steel Carports can provide either a Generic or Specific set of plans at an additional cost. The order must be placed with the 10% down payment and the price for plans before we make a request to have them sent out. Plans take between 10-14 business days from the day we receive the order in the office and it is approved to move forward.

 

The reason the order must be placed before we release plans is to ensure that the drawings are being made up to your specific order. Specific plans are nonrefundable and if you must make modifications to pass for a permit after they are drawn up, there will be an additional fee. If you fail to pass for a permit yet again, and if you wish to cancel the order, you can receive a portion of your down payment back.

 

American Steel Carports has trained sales reps and engineers to help answer your questions and to make any accommodations that you may need.

Protect Your Second Home

Our RVs are like a second home: they protect us from the weather, they give us comfort, and they take us anywhere we want to go. Next time you’re planning a family vacation out in the woods, guess how you’ll get there and start the adventure?

 

RVs are a big investment, and we need to take care of them. One of the biggest concerns is where you will park your RV. Some RVs are giants compared to others, and you might be discouraged because our flyers say that our metal structures aren’t higher than 12 feet tall. However, that doesn’t mean that we cannot go over 12 feet tall. In fact, the tallest we can go is 20 feet! Take a look at this 16’W x 36’L x 14’H unit:

 

 

You can let your imagination run wild when it comes to customizing your metal RV cover. This particular RV cover comes with a horizontal roof, a 12’ x 12’ overhead door, a 36” x 80” walk-in door, and concrete anchors.

 

Looking for something taller? How about something wider? Perhaps longer? Don’t worry, all of our units are custom-built per your needs! Give us a call to speak with one of our experts! Don’t forget to ask about our financing options. Want to see our buildings in person? Ask for your local dealer!